|
|
| Applications | Our most popular model, Sonic Shock 4 is an effective anti theft solution for any equipment - projectors, televisions, and computers - which have a 2 x 3.8 inch (5 x 10 cm) flat surface area for mounting |
| Dimensions | 2 x 3.8 inches x 1.3 inches high (5 x 10 cm x 0.33 cm high) The Sonic Shock 4 is sufficiently thin to be affixed to the back of wall mounted flat panel televisions |
| Kit Contents | Alarm module, Mounting plate, Electronic tether, Ilco removable core lock, 9 volt industrial alkaline battery Installation & User Guide Kit does not include glue or keys; these items are ordered separately. Economise buy ordering 1 glue cartridge for every six Sonic Shock 4 alarms, and only a handful of keys |
| Construction | Alarm housing: 0.05 inch / 1.3 mm thick 18 gauge hard grade brushed stainless steel |
| Mounting plate | 0.07 inch /1.9 mm thick 14 gauge hard grade stainless steel |
| Acoustic Generator | Mounting plate: 0.07 inch /1.9 mm thick 14 gauge hard grade stainless steel |
| Locks | Ilco 5 wafer cam lock Removable core Available keyed alike or keyed differently (200 combinations) |
| Power | 9 volt industrial alkaline battery 50 milliamp hour capacity 1 microamp monitoring current 400 milliamp current at full alarm |
| Battery Life | 5+ years in monitoring mode (50 years theoretically possible) 2 hours in full alarm |
| Control Circuit | Proprietary Comprotec single purpose analogue computer |
| Adhesive | Methylmethacrylate kit ("Plastic Welder") 2 part exothermic cure non toxic structural adhesive 3,500 psi strength on al metals and most plastics (except polypropylene) Very high impact resistance (eg. hammer blows) 4 minute working time; 80% strength in 2 hours; 100% in 24 hours Impervious to water or solvents when cured |
| Surface Bonding Area | 40 square centimetres / 6.75 square inches |
| Weight | 500 grams |
| Operating Temperature | 0 - 45 degrees Centigrade Alarm is intended for indoor use |
| Environmental | All Sonic Shock electronics are European Union RoHS compliant (lead free electronics) All packaging, master packaging, and paper inserts are fabricated from 100% recycled materials |
| Support | Instructions included with every kit |
| Warranty | Product, excluding the battery, is warranted for life, and for all causes (including damage inflicted by customer or a theft attempt). Warranty is limited to repair or replacement of the alarm FOB our factory or authorized distributor |
| Applications | Designed for use on flat panel televisions, but also recommended as a superior anti theft solution for any equipment - projectors, computers, printers - which have a 2 x 5.4 inch (5 x 13.6 cm) flat surface area for mounting |
| Dimensions | 2 x 5.4 inches x 1.3 inches high (5 x 13.6 cm x 0.33 cm high) The Sonic Shock Plasma is sufficiently thin to be affixed to the back of wall mounted flat panel televisions |
| Kit Contents | Alarm module, Mounting plate, Electronic tether, Ilco removable core lock, 9 volt industrial alkaline battery, Installation & User Guide Kit does not include glue or keys; these items are ordered separately. (Distributors ordering kits from us for their inventory typically specify a glue cartidge and 2 keys in each kit. Most customers, however, can economize by ordering only 1 glue cartridge for every four Sonic Shock Plasma alarms, and only a handful of keys.) |
| Construction |
Alarm housing: 0.05 inch / 1.3 mm thick 18 gauge hard grade brushed stainless steel Mounting plate: 0.07 inch /1.9 mm thick 14 gauge hard grade stainless steel |
| Acoustic Generator | |
| Locks | Ilco 5 wafer cam lock Removable core Available keyed alike or keyed differently (200 combinations) The same key can operate Sonic Shock 4, Sonic Shock Plasma, and Sonic Shock 3 or 2 versions (now discontinued). |
| Power | 9 volt industrial alkaline battery 650 milliamp hour capacity 1 microamp monitoring current 600 milliamp current at full alarm |
| Battery Life | 5+ years in monitoring mode (50 years theoretically possible) 1 hours in full alarm |
| Control Circuit | Proprietary Comprotec single purpose analog computer |
| Adhesive | Methylmethacrylate kit ("Plastic Welder") 2 part exothermic cure non toxic structural adhesive 3,500 psi strength on al metals and most plastics (except polypropylene) Very high impact resistance (eg. hammer blows) 4 minute working time; 80% strength in 2 hours; 100% in 24 hours Impervious to water or solvents when cured |
| Surface Bonding Area | 63 square centimeters / 10 square inches |
| Weight | 600 grams |
| Operating Temperature | 0 - 45 degrees Centigrade Alarm is intended for indoor use |
| Environmental | All Sonic Shock electronics are European Union RoHS compliant (lead free electronics) All packaging, master packaging, and paper inserts are fabricated from 100% recycled materials |
| Support | Instructions included with every kit |
| Warranty | Product, excluding the battery, is warranted for life, and for all causes (including damage inflicted by customer or a theft attempt). Warranty is limited to repair or replacement of the alarm FOB our factory or authorized distributor |
Product Range |
|||
| Quote | Product | Online Price ex VAT | |
| SSP | Sonic Shock Plasma | £99.95 £97.95 | |